-
Your shopping cart is empty!
MENU
Your shopping cart is empty!
N Scale 10 pair assembled passenger car couplers. Couplers work with both 4 and 6 wheel passenger trucks. ..
Prod. Code 001 10 004
$57.75
N Scale Assembled Underslung Short Shank BMC (2004-1) 2 pr.Assembled 2004-1 coupler. For new Kato locomotives, coupler will automatically be at correct NMRA centerline height of .216” 2 pr included. ..
Prod. Code 001 02 052
$15.15
AVAILABLE AUGUST 1N Scale Assembled Underslung Short Shank BMC (2004-1-10) 10 pr.Assembled 2004-1 coupler. For new Kato locomotives, coupler will automatically be at correct NMRA centerline height of .216” 10 pr included. ..
Prod. Code 001 10 007
$59.95
N Scale Conversion for use with Bachmann locos and cars with #9722-1 long coupler assembly ..
Prod. Code 001 33 031
$9.55
N Scale short shank coupler assemblies with adaptors For use with newer BACHMANN locos and cars BACHMANN locos & cars equipped with #9722 & #9170 (medium shank) coupler assembly. (See Bachmann instructions for coupler assembly part numbers.) ..
Prod. Code 001 33 030
$9.55
N Scale BMC - Brown (1015/1016-B) 3pr 2 pair short shank & 1 pair medium shank with draft gear boxes. ..
Prod. Code 001 02 001
$9.45
N Scale BMC -unassembled,BROWN (1025B) 2pr ..
Prod. Code 001 02 012
$6.40
N Scale ..
Prod. Code 001 02 013
$9.45
N Scale Assembled 001 02 011 RDA (Reverse Draft Angle) Couplers (4), 00-90 Screws (4), Truck Restraining Springs (4). ..
Prod. Code 001 02 010
$10.75
N Scale 2 pair assembled 1016 couplers. Brown. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of coupler. ..
Prod. Code 001 02 007
$15.05
N Scale 2 pair Assembled 1015 couplers Brown. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of coupler. ..
Prod. Code 001 02 004
$15.05
N Scale Brown This kit contains: 20 #001 95 251 coupler knuckle shanks, 20 #001 95 295 coupler lip shanks, 20 #001 95 101 snap-together draft gear boxes, 20 #001 95 165 lids, 20 #001 95 522 shims, 20 centering springs, 20 00-90 screws, and 20 trip pins (enough parts to make 10 pair #1015 couplers) ..
Prod. Code 001 10 002
$20.50
N Scale These period specific couplers are designed to work with the Z scale 905 draft gear box mounted on Micro Trains Line Civil War and pre 1900’s freight cars.Package includes: Four (4) coupler boxes, eight (8) pins and eight (8) link & pin (drawbar) couplers ..
Prod. Code 001 02 060
$12.75
N Scale This conversion fits Kato USRA 2-8-2 locomotives. Package includes one front and one rear coupler...
Prod. Code 001 41 060
$10.75
N Scale Package includes one front and one rear coupler. This conversion fits: Con-Cor: PA-1 diesel. ..
Prod. Code 001 35 000
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: atlas: Industrial Switcher Bachmann: 0-6-0 Plymouth Diesel Switcher (1972 & newer) Minitrix: U28, U30CG. ..
Prod. Code 001 30 009
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: ATLAS: EMD E-8 Diesel. This kit includes unassembled T-Shank couplers with draft gear box adaptors to be used in existing draft gear boxes...
Prod. Code 001 32 000
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: CON-COR (Rowa, Rivarossi) - 2-8-8-2 and Importex International (Bemo) - 2-8-8-2 ..
Prod. Code 001 30 002
$9.75
N Scale Package includes one front and one rear coupler. this conversion fits: ARNOLD-RAPIDO/REVELL/RIVAROSSI: FA-1, FA-2, FP-9A, FP-9B, GP-7, GP-9, GP-30, S2, GG-1, old time combine, streamlined passenger cars, bi-level cars and 2-8-2 Mikado tender only. ATLAS: E-7A, F-9A, GP-9, GP-30, FRONT RUNNER, PLYMOUTH DAVENPORT, and 0-6-0. BACHMANN: 4-4-0 American tender only. CON-COR: ‘C’ LINER, RDC, U50, and GAS TURBINE (w/o tender). MINITRIX/MARKLIN: FM H-12-44, U28C, U30C and American steel caboose. MODEL POWER: ALCO C-420, F40 PH, GP-40, RSD-4/5, and RSD-15. RIVAROSSI: passenger and freight cars w/metal clip. RSO ATEST: GP-40. ..
Prod. Code 001 30 003
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: Con-Cor: PB-1 diesel...
Prod. Code 001 35 010
$8.80
N Scale Package includes one front and one rear coupler. this conversion fits: atlas: EMD SD-45, Alco RSC-2 CON-COR: Alco 636 MRC: FA-1, FA-2. This kit includes unassembled T-shank coupler with draft gearbox adapters to be used in existing draft gearboxes. ..
Prod. Code 001 30 008
$8.80
N Scale Package includes one front and one rear coupler. fits: Model Power (formerly AHM): FA-1 Model Power (formerly MRC): RSD-15, Century 420 Model Power: F40PH, GP-40 CON-COR (Kato): EF-70. This kit includes unassembled T-shank couplers with draft gear box adaptors to be used in existing draft gear boxes. ..
Prod. Code 001 30 004
$8.80
N Scale Package includes one front and one rear coupler. this conversion fits: Rivarossi, CON-COR, Dimi-Trains: SW-1500 Cow or Calf (powered or unpowered) CON-COR: Bay Window & Extended Vision Caboose ATLAS: Extended Vision Caboose. This kit includes unassembled T-shank couplers with draft gear box adaptors and coupler box clips, to be used in existing draft gear boxes. ..
Prod. Code 001 30 007
$8.80
N Scale Package includes one front and one rear coupler. fits: AHM: 0-6-0T Saddle Tank Switcher Life-Like: 0-6-0T Side Tank Switcher Model Power, ATLAS: 0-6-0 Side Tank Switcher. This kit includes unassembled T-Shank couplers with draft gear box adaptors to be used in existing draft gear boxes. ..
Prod. Code 001 30 005
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: ATLAS, CON-COR, Rivarossi: Heavyweight Passenger Cars Model Power, PMI: FP-45 Lima: P-30 w/metal draft gear clip ATLAS: P-23-1 Minitrix: MKI Corridor Composite Coach. ..
Prod. Code 001 30 006
$8.80
N Scale This conversion fits Minitrix - EMD F-9 Locomotives. Package includes 1 pair unassembled coupler conversions...
Prod. Code 001 44 000
$8.80
N Scale This conversion fits MRC- 2-8-4 Berkshire Locomotive. Package includes 2 pr unassembled coupler conversions...
Prod. Code 001 47 000
$14.95
N Scale This conversion fits Minitrix - 0-6-0T Donkey. Package includes 2 pr unassembled coupler conversions...
Prod. Code 001 44 010
$8.80
N Scale This conversion fits Life-Like F-7, GP-38, BL-2, 0-6-0 Saddle Tank Switcher & Locomotives with Plastic Coupler Retention Clip. Includes 2 pair unassembled couplers...
Prod. Code 001 42 000
$9.55
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas, Rivarossi: Fairbanks Morse “C” liner Diesel. This kit includes unassembled T-shank couplers with draft gear box adaptors to be used in existing draft gear boxes. ..
Prod. Code 001 32 010
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas plymouth WTD Diesel Switcher (before 1972) does not fit: Newer Industrial Switcher (after 1972). ..
Prod. Code 001 32 020
$8.80
N Scale Package contains: 24 - 5/16” multi-purpose screws - 00-90 x 5/16” ..
Prod. Code 001 12 020
$4.85
N Scale 2 pair passenger car couplers. Black. ..
Prod. Code 001 02 025
$12.70
N Scale Package includes one front and one rear coupler. This conversion fits: Kato: F-3, F-7 ‘A’ unit Locomotives, E8/9, PA-1 ‘A’ unit diesel locomotives. This kit is designed for the Kato E8/9, PA-1 and F3/7 locomotives with similar pilot underset mountings and split one-piece truck-mounted rear draft gear. This kit contains: One preassembled 001 01 010 short shank coupler for pilot conversion and one 001 01 016 coupler for rear conversion. ..
Prod. Code 001 41 050
$10.75
N Scale Package includes one front and one rear coupler. This conversion fits: Bachmann: F-9 ‘A’ unit powered Locomotives (older stylew/metal draft gear box). Kit includes one each: 001 30 013 & 001 30 014 universal T-shank coupler assemblies to be used in existing draft gear boxes. ..
Prod. Code 001 33 000
$8.80
N Scale Package includes one front and one rear coupler. This conversion fits: Bachmann: usra 0-6-0 Switcher w/Tender. ..
Prod. Code 001 33 010
$8.80
N Scale Package includes one front and one rear coupler. ..
Prod. Code 001 33 020
$9.55
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas: RS11 Locomotive. This kit includes completely assembled body mount couplers and pilots for front and rear conversions. NOTE: This kit includes a pair of #1027 couplers for curved track of 12” radius or more, plus a pair of #1025 couplers for use on layouts with radii of less than 12”. Use the coupler that best fits your needs. The #1027 coupler is assembled. If using the #1025 couplers, install them in the #1027 draft gear box. ..
Prod. Code 001 32 030
$20.50
N Scale Pilot Locomotive Coupler Conversion Kit (1152) Package includes one front and one rear coupler. This conversion fits: Atlas RS-3 Locomotives. NOTE: This kit includes a pair of #1027 couplers for curved track of 12” radius or more, plus a pair of #1025 knuckle & lip shanks for use on layouts with radii of less than 12-inches. Use the coupler that best fits your particular need. The #1027 coupler is assembled. If using the #1025 knuckle & lip shanks, disassemble the #1027 coupler & install the #1025 knuckle & lip shanks in the #1027 draft gear box. (Fig. 1). This conversion requires the use of a #62 (.038” or .96mm) dia. tap drill, a #56 (.046” or 1.2mm) dia. clearance drill, and a 00-90 tap. These tools are available in Micro-Trains® Tap & Drill Set. ..
Prod. Code 001 32 040
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas: RSD 4/5 Locomotives. This kit replaces the original couplers that assembled (lid down) with the new RDA (reverse draft angle) 001 02 000 body mount couplers (assembled lid up) and pilots for greater pulling capacity. Both couplers mount at .279” (7.0mm) above rail top. Read instructions through once before you begin and study figures to familiarize yourself with the name of each part. Front and Rear Converson: This conversion requires the use of a #62 (.038” or .96mm) tap drill, a #56 (.046” or 1.2mm diameter) clearance drill, and a 00-90 tap. These tools are available in Micro-Trains® Tap and Drill Set. ..
Prod. Code 001 32 050
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas: RSD-12 Locomotives. This kit comes with a pair of assembled Reverse Draft Couplers (RDA). You will need a #62 (.038” or .96mm) tap drill, a #56 (.046” or 1.2mm) clearance drill and a #00-90 tap to complete the installation. If you don’t already have them you may purchase our Tap and Drill Set. ..
Prod. Code 001 32 060
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas / kato: GP-7, GP-9 Locomotives (before 1995). This kit includes a pair of 001 01 009 couplers for curved track of 12” radius or more, plus a pair of 001 01 007 knuckle & lip shanks for use on layouts with radii of less than 12-inches. Use the coupler that best fits your particular need. The coupler is assembled. If using the knuckle & lip shanks, disassemble the coupler & install the knuckle & lip shanks in the draft gear box. (Fig. 1). Note: This conversion requires the use of a #62 (.038” or .96mm) dia. tap drill, a #56 (.046” or 1.2mm) diameter clearance drill, and a 00-90 tap. These tools are available in Micro-Trains® Tap & Drill Set. ..
Prod. Code 001 32 110
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas walthers / roco: fa-1 Locomotives. Kit includes: Front and rear pilot, two 001 01 001 RDA couplers with shim, 00-90 1/4” screws and sheetmetal. You will need a #62 (.38” or .96mm) tap drill and a #00-90 tap to complete the installation. If you don’t already have them, purchase Micro-Trains Tap and Drill Set. ..
Prod. Code 001 32 100
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits:Kato: GP-50 Locomotives. This kit contains two pilots, two unassembled couplers with universal shim, and 00-90 x 5/16” screws. This conversion requires the use of a #62 (.038” or .97mm) tap drill, a #56 (.046” or 1.2mm diameter) clearance drill, and a 00-90 tap. These tools are available in Micro-Trains® Tap and Drill Set. ..
Prod. Code 001 41 010
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas: RS-1 Locomotives (before 1998). This kit contains two pilots, two assembled 1015 RDA couplers, and 00-90 x 5/16” screws. This conversion requires the use of a #62 (.038” or .97mm) tap drill, a #56 (.046” or 1.2mm diameter) clearance drill, and a 00-90 tap. These tools are available in Micro-Trains® Tap and Drill Set. ..
Prod. Code 001 32 070
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas: GE U25B Locomotives (before 1998). his kit includes front and rear pilots, two assembled (without trip pins installed) body mount couplers, and two trip pins for front and rear conversions. ..
Prod. Code 001 32 080
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Kato: U30C Diesel Locomotives.Kit includes two assembled 1015 RDA couplers w/universal shim & draft gear. Two converson pilots & three 00-90 screws. ..
Prod. Code 001 41 030
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Atlas / kato: sd-7 &sd-9 Locomotives. ..
Prod. Code 001 32 090
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Bachmann: Dash 8-40C Diesel Locomotives. This kit contains: two 001 02 000 couplers and draft gear boxes, assembled upside down: two conversion pilots (Fig. 4): and two 00-90 screws...
Prod. Code 001 33 040
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Bachmann: EMD SD40-2. ..
Prod. Code 001 33 050
$20.50
N Scale Package includes one front and one rear coupler. This conversion fits: Bachmann: dash 8-40cw diesel. This kit contains: two #1016 couplers and draft gear boxes, two conversion pilots and two 00-90 screws. ..
Prod. Code 001 33 060
$20.50
N Scale This conversion fits Life-Like BL-2 Locomotives. Package includes 2 pair unassembled coupler conversions...
Prod. Code 001 42 010
$20.50
N Scale This conversion fits Life-Like FA-2 Locomotives. Package includes 2 pair unassembled coupler conversions...
Prod. Code 001 42 020
$20.50
N Scale This conversion fits Life-Like GP18 Locomotives (for models made before 1995). Package includes two pair unassembled coupler conversions...
Prod. Code 001 42 030
$20.50
N Scale This conversion fits:Kato: E8/9 & PA-1* ‘A’ unit Diesel Locomotives (*1998 release). This kit is designed for the new Kato E8/9 and other locomotives with similar pilot underset mountings and split one piece truck mounted rear draft gear. This kit contains: Two pair #2001 couplers with long and short coupler lip shanks and coupler knuckle shanks. For short and long radii track curves. ..
Prod. Code 001 41 040
$9.90
N ScaleUnassembled RDA Body mount couplers. 2 pair short shank & 1 pair medium shank with draft gear boxes. ..
Prod. Code 001 02 000
$9.45
N Scale Silver 10 pair assembled passenger car couplers. Couplers work with both 4 and 6 wheel passenger trucks. ..
Prod. Code 001 10 005
$57.75
N Scale 2 pair assembled passenger car couplers. Silver. ..
Prod. Code 001 02 026
$12.70
N Scale Package contains parts for 2 pair of couplers ..
Prod. Code 001 02 008
$8.55
N Scale Assembled 001 02 011 RDA (Reverse Draft Angle) Couplers (4), 00-90 Screws (4), Truck Restraining Springs (4). ..
Prod. Code 001 02 009
$10.75
N Scale Ten pair unassembled body mount couplers and snap-together draft gear boxes. This kit contains: 20 #001 95 252 coupler knuckle shanks, 20 #001 95 296 coupler lip shanks, 20 #001 95 102 snap-together draft gear boxes, 20 #001 95 166 lids, 20 #001 95 523 shims, 20 centering springs, 20 00-90 screws, and 20 trip pins (enough parts to make 10 pair #1016 couplers). ..
Prod. Code 001 10 003
$20.50
N Scale 2 pair assembled 1016 couplers. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of coupler. ..
Prod. Code 001 02 006
$15.05
N Scale 2 pair Assembled 1015 couplers. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of coupler. ..
Prod. Code 001 02 003
$15.05
N Scale 10 pair Assembled 1015 couplers. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of coupler. ..
Prod. Code 001 10 006
$59.95
N Scale This kit contains: 20 #001 95 251 coupler knuckle shanks, 20 #001 95 295 coupler lip shanks, 20 #001 95 101 snap-together draft gear boxes, 20 #001 95 165 lids, 20 #001 95 522 shims, 20 centering springs, 20 00-90 screws, and 20 trip pins (enough parts to make 10 pair #1015 couplers) ..
Prod. Code 001 10 001
$20.50
N Scale Unassembled long T shank coupler conversion. ..
Prod. Code 001 30 014
$8.80
N Scale Unassembled medium T shank coupler conversion. ..
Prod. Code 001 30 013
$8.80
N Scale MT-7 Short T shank coupler conversion. Unassembled ..
Prod. Code 001 30 012
$8.80
