N Scale Pilot Locomotive Coupler Conversion Kit (1152)
Package includes one front and one rear coupler. This conversion fits: Atlas RS-3 Locomotives. NOTE: This kit includes a pair of #1027 couplers for curved track of 12” radius or more, plus a pair of #1025 knuckle & lip shanks for use on layouts with radii of less than 12-inches. Use the coupler that best fits your particular need. The #1027 coupler is assembled. If using the #1025 knuckle & lip shanks, disassemble the #1027 coupler & install the #1025 knuckle & lip shanks in the #1027 draft gear box. (Fig. 1). This conversion requires the use of a #62 (.038” or .96mm) dia. tap drill, a #56 (.046” or 1.2mm) dia. clearance drill, and a 00-90 tap. These tools are available in Micro-Trains® Tap & Drill Set.